*Do not leave the battery charger plugged in the headset for more than 24 hours.

1. Switch on your phone and select the Bluetooth® discover mode on the mobile phone (consult your Bluetooth® mobile phone user guide).
2. Press and hold (do not release it) the TALK button for about 7 seconds until the indicator light flashes red and blue alternately. Then release the TALK Button. A beep can be heard in the speaker.
3. Once the mobile phone detects the headset, a message is displayed containing the name of the headset: “O2 blue”.
4. Follow the phone instructions to accept the pairing. The PIN code (or passkey) is 0000.
5. When the pairing is completed, the indicator light will switch to blue, and flashes slowly.

Two audio communication profiles are used by mobile phones – Headset profile and Hands-free profile. Some mobile phones support only one of them while others support both (for details please click here). The O2 blue headset supports both profiles. When pairing an O2 blue with a dual-profile mobile phone, Hands-free profile is used by default. However, some features, such as multi-pairing, only work under Headset profile. If you wish to use Headset profile, you have to force the mobile phone to pair under Headset profile by pressing the Vol- on your O2 blue headset around 15 seconds until the indicator light flashes red and blue alternately. Then follow the steps above.

The profiles available for use may be restricted by functions available on your specific handset, please consult your handset manual.

*To save power, the blue indicator light flashes at long intervals. To check if your headset is ON , press shortly on the TALK button. If the indicator light is blue, it means your headset in ON.

Switching the headset OFF
Press and hold the TALK button for about 5 seconds until the red indicator light is on after the quick blue flashes. A beep (2 tones) can be heard in the speaker. Release the TALK Button.

• Making a call

Mobile phone with voice recognition on your mobile phone or PDA.

• Make sure the voice recognition function on your mobile is activated and your voice tags have been recorded with the phone.
• Press the TALK button shortly (when there is no incoming and no active Call). The audio connection is established.
• Wait for the audio signal sent by the mobile phone (generally a short tone).
• Speak out the name of person you wish to call, as stored in the phone voice tags. The mobile phone will dial the stored number.

Mobile without voice recognition on your mobile phone or PDA.

• Make sure both the headset and the mobile phone are ON and in stand-by mode.
• Dial the phone number you wish to call on your mobile phone.
• After roughly 2 seconds, the audio connection is established.

• Answering a call/ Rejecting a call/ Ending a call/ Redial the last number

Answering a call
When the headset rings, press the TALK button shortly.

Rejecting a call
Press the TALK button for about 2 seconds when the headset is ringing.
This function only works in the Hands-Free Profile.

Ending a call
Press the TALK button shortly to end an active call.

Redial the last number
Press the TALK button for about 2 seconds if there is no active call and no incoming call, until you hear a beep.
This function only works in the Hands-Free Profile.

• Volume and mute

Adjusting the volume

To increase the volume during an active call, press the VOL+ button.

To decrease the volume during an active call, press the VOL- button.

Muting the microphone

To mute the microphone during an active call
Press and hold the VOL+ button until you hear a two-tone beep, you can hear the other party but they cannot hear you.
A periodic tone is heard in the speaker while the microphone is muted.

To end the mute function
When the microphone is muted press and hold the VOL+ button until you hear a two-tone beep. The periodic tone will end.

• Transferring a call

Transferring a call to the mobile device
During an active call, press the TALK button for about 2 seconds.
This function only works in the Hands-Free Profile.
In the Headset profile, you can simply turn off your headset.

Transferring a call to the headset
During an active call on the mobile phone, press the TALK button shortly on the headset to transfer the call from the mobile phone to the headset.

• Multi pairing

The O2 blue can be paired to two mobile phones. Simply follow the “Pairing” instructions to pair the 2 mobile phones.

All incoming calls on both firstly and lastly paired phone will be sent to your headset, and can be answered on the headset. All outgoing calls from your headset will be sent only to the lastly paired phone.

However, multi pairing only works with handsets which are both paired in the Headset profile. If your handset supports both Handset and Hands-free profile, please click here to find out more.

• Do not drop or try to alter the shape of your headset.
• Do not expose your headset to liquid or moisture.
• Do not expose your headset to extreme temperatures. Temperature range : 0-40C.
• Do not expose your headset to fire or open flames.
• Do not try to disassemble your headset. Service and Maintenance can only be performed by authorised dealers.
• Keep your headset away from dust and dirt.
• Do not let children play with your headset, since it contains small parts that could become detached and create a choking hazard.
• Check the regulation in your area if you plan to use your headset while driving.
• Turn off your headset before boarding an aeroplane.

CAUTION : Danger of explosion if battery is incorrectly replaced. Replaced only with the same or equivalent type. (voltage : 3.2 –4.2V, typical 3.8V, typical current 40mAh)